Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Headlight Bulbs on a Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: Headlight bulb

Are the headlight bulbs blown? Let's see how to remove the front headlight bulbs with access through the wheel arch liner. Use a suitable screwdriver to remove the plastic cover at the bottom of the wheel arch liner, reaching the front headlight located in the bumper. After removing the bulb holder, take out the damaged bulb and fit a new one (same size and voltage). Refit the plastic cover under the wheel arch liner. Perform this replacement on the front headlights to maintain the same type of illumination. Test the lights for proper operation.

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Front Headlamp Bulb on Fiat 500L
Removing Front Headlamp Bulb on Fiat 500L
Fiat 500 (2012-2023 / 500 L) Remove the front headlamp bulb on the Fiat 500L. Open the bonnet by pulling the lever located at the bottom right of the dashboard. Locate the inspec…
How to Replace the Front Headlight Bulbs on a Fiat 500
How to Replace the Front Headlight Bulbs on a Fiat 500
Fiat 500 (2007-2024 / 312) Want to replace the bulbs in the front headlight of a Fiat 500? Follow the steps in the guide video. Open the bonnet by pulling the lever located at …
Replacing Bulbs on a Fiat 500L
Replacing Bulbs on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Replace the non-functioning bulbs on a Fiat 500L. Open the front bonnet by pulling the lever located at the bottom right of the dashboard and secure …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos