Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Bumper of a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Rear bumper

See other generations:
Video tutorial

Open the boot and remove the four Torx screws located above the rear bumper, then also remove the 8 mm screws on the wheel arch liners, as shown in the video. Lift the car using a ramp or a jack and proceed to work on the lower part.

Remove the Torx screws located under the bumper itself and, slowly, detach it. Take it off gently and a little at a time to avoid damaging the part of the car that supports it. Refit the new bumper starting with the screws of your choice, ensuring they do not get damaged and that you tighten them all. As you can see, this is not a complex job; it just requires a bit of time.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

Removing the Rear Bumper of the Fiat Punto
Removing the Rear Bumper of the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Is the bumper on your car damaged? Do you want to remove it? Let’s see how to take off the rear bumper. Unlock and open the tailgate, and locate all …
Removing the Rear Bumper on Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, learn how to remove the rear bumper from the Fiat Grande Punto. First, lift the car as you will need to remove the rear wheel: then, r…
How to remove the rear bumper of the Fiat Punto
How to remove the rear bumper of the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Today we will discover the process and instructions that will allow us to disassemble and replace the rear bumper of the Fiat Punto, in simple and qu…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos