Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cabin Filter Replacement on Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Cabin air filter

Let’s look at replacing the cabin filter on a Fiat Punto. Remove the cover located at the bottom right of the dashboard, and get a screwdriver or a cordless drill. Unscrew the securing screws from above the plastic cover: remove the cap from the filter housing, then extract the worn cabin filter. Insert a new pollen filter, ensuring it fits snugly around the walls of the housing, refit the cap of the filter housing and tighten the screws. Cover the bottom of the dashboard with the fabric cover. Ensure all pieces are reassembled.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the Fiat Punto
How to replace the cabin air filter of the Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) The cabin air filter of the Fiat Punto series 3 is located inside the cabin under the passenger side glove compartment. To replace the filter, it is …
How to Replace the Cabin Filter on the Fiat Punto
How to Replace the Cabin Filter on the Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Regular maintenance of the cabin air filter in your Fiat Punto Mk3 is very important, especially if you want to use the air conditioning or heating s…
Replacement of the cabin air filter of the Fiat Grande Punto
Replacement of the cabin air filter of the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To retain impurities and prevent them from entering the ventilation system of the Fiat Grande Punto's cabin, a filter is installed on the intake. Aft…

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the cabin filter on the Fiat Grande Punto? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos