Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Number Plate Bulb on a Fiat Scudo

Model: Fiat Scudo MK 1 - Years 1996-2007
Part: License plate light

Before starting the replacement, open the rear loading door to work unobstructed. Begin by disengaging the number plate lamp holder from its housing, moving it to the right before pulling it towards you. Next, disconnect the connector located at the back of the lamp holder. Once the connector is disconnected, you will reach the bulb. To remove it from its housing, rotate the bulb anti-clockwise and then pull it out. This will remove the blown bulb. To fit the new bulb and reassemble everything, simply follow these instructions in reverse, successfully completing the replacement.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Fiat Scudo
How to Replace the Front Headlamp Bulb on a Fiat Scudo
Fiat Scudo (1996-2007 / MK 1) To replace the front headlamp bulb on a Fiat Scudo, open the bonnet and remove the protective cap located at the rear of the headlamp. This will allo…
Replacing the Headlight Bulb of the Fiat Scudo
Replacing the Headlight Bulb of the Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) This guide briefly outlines the main instructions for removing and replacing the headlight bulb of the Fiat Scudo. First, open the bonnet of your car…
Instructions for Replacing Number Plate Light
Instructions for Replacing Number Plate Light
Fiat Scudo (2007-2016 / MK 2) To replace the number plate light bulb, you need to remove the internal trim panel of the tailgate. This panel is secured with push fittings that hav…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos