Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing Number Plate Light

Model: Fiat Scudo MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Light bulb

See other generations:
Video tutorial

To replace the number plate light bulb, you need to remove the internal trim panel of the tailgate. This panel is secured with push fittings that have a central pin which, when inserted, expands the retaining tabs of the fitting.

First, extract the pin and then the fitting to remove the panel. At this point, you can access the bulb holder for the number plate lights and replace the bulb (T10 fitting).

Since the panel has been removed, it is advisable to replace both bulbs to avoid having to disassemble again shortly.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Number Plate Bulb on a Fiat Scudo
How to Replace the Rear Number Plate Bulb on a Fiat Scudo
Fiat Scudo (1996-2007 / MK 1) Before starting the replacement, open the rear loading door to work unobstructed. Begin by disengaging the number plate lamp holder from its housing,…
Replacing the Headlight Bulb of the Fiat Scudo
Replacing the Headlight Bulb of the Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) This guide briefly outlines the main instructions for removing and replacing the headlight bulb of the Fiat Scudo. First, open the bonnet of your car…
How to Dismantle the Rear Light and Replace the Bulbs on the Fiat Scudo
How to Dismantle the Rear Light and Replace the Bulbs on the Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) The following instructions will show you how to dismantle and replace the rear light and its bulbs on the Fiat Scudo. First, open the rear doors and …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos