Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Boot Light on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Light bulb

See other generations:
Video tutorial

Today, you will learn how to remove and replace the boot light on a second series Fiat Punto. First, open the boot lid and locate the light fitting: then lever it out by the sides to remove it, along with the bulb.

At this point, disconnect the electrical connector to grasp the light fitting and remove the old non-working bulb; then replace it with the correct type and reinsert it into the bulb holder. Now reconnect the electrical connector to the light fitting and reassemble it by securing it on the side!


Updated on 31 March 2026 by ScegliAuto


Related tutorials

Changing the Boot Courtesy Light
Changing the Boot Courtesy Light
Fiat Punto (1999-2011 / MK 2, 188) Open the boot and look to the right; near the rear speaker, you will find the courtesy light. Carefully unclip it from its housing, taking care not t…
How to open the trunk of the Fiat Grande Punto.
How to open the trunk of the Fiat Grande Punto.
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Opening the trunk of the Fiat Grande Punto from the outside is a simple and quick operation that can be done independently. To perform this action, w…
Replace the Fog Light Bulb on a Fiat Grande Punto
Replace the Fog Light Bulb on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's tutorial, we will go through the steps to remove and replace the fog light bulb on a Fiat Grande Punto, as well as on the Punto Evo. To ac…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos