Do it yourself
Frequently asked questions about cars and motorcycles

How to open the trunk of the Fiat Grande Punto.

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016

See other generations:
Video tutorial

Opening the trunk of the Fiat Grande Punto from the outside is a simple and quick operation that can be done independently. To perform this action, we need to position ourselves in front of the trunk and press on the vehicle's emblem; by doing this, the trunk will lift slightly, and using both hands, we can fully raise the trunk.

Unlike the front hood, there is no need to secure the trunk with any support rod to keep it open. To close the trunk of the Fiat, simply let it fall back down with an initial push downward.

If it does not open from the outside, it is possible to open the trunk from the inside by pressing the lever located next to the seat.


Posted on 15 December 2025 by ScegliAuto


Related tutorials

Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This video demonstrates how to open the stuck boot of a Fiat Grande Punto. You will need to enter from inside, so fold down the rear seat and clear t…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This video shows how to open the boot of the Grande Punto using the emergency release. Enter the cabin and access the boot lock from inside the boot.…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) If the boot of your Fiat Grande Punto is stuck, it’s easy to panic, but you should know that it is possible to open a stuck boot from the outside. To…

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the inertia switch on the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos