|
Do it yourself
| |||
| ||||
How to Remove the Rear Boot Panel in a Fiat Grande Punto
Model: Fiat Punto
199, MK 3, Grandepunto , Punto EVO
- Years:
2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
This video is currently unavailable
This short video will show you how to remove the boot trim panel in a Fiat Punto or a Fiat Punto Evo. This operation is quite easy and quick and may be necessary, for example, when you need to access the rear wiper motor. First, after opening the boot, using a simple cross screwdriver, unscrew all the screws that secure the panel to the boot. At this point, detach the panel by applying slight pressure on the nine clips until you can remove it (be careful with the clips as they are quite prone to breaking). Now, you can carry out your repairs and finally reassemble everything by reversing the procedure.
Updated on 1 April 2026 by ScegliAuto
Related tutorials
Fiat Punto
(2005-2018 /
199, MK 3, Grandepunto , Punto EVO)
This guide shows the steps to remove and replace the insulation panel of the bonnet of the Fiat Grande Punto, as well as the Punto Evo. First, open t…
Fiat Punto
(2005-2018 /
199, MK 3, Grandepunto , Punto EVO)
This guide outlines the steps to remove and replace the front door panel of a Fiat Grande Punto, as well as the Punto Evo. First, open the front door…
Fiat Punto
(2005-2018 /
199, MK 3, Grandepunto , Punto EVO)
To replace the boot gas struts on a Fiat Grande Punto, disconnect the plastic retaining rings located at the top and bottom of the struts. Once these…
Other guides you may be interested in |
How to open the boot if it is stuck on a Mercedes B-Class?
On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.015
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |