Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Cabin Filter on Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Cabin air filter

Unscrew the fixing screws of the panel under the passenger front mat and remove the panel itself. At this point, remove the vertical plastic that leads to the centre tunnel, as shown in the video. Unscrew the two screws that secure the filter cover and take it out. Simply insert the new pollen filter you purchased into its housing: be careful as it has a specific orientation for insertion. If in doubt, check how the old filter was installed. Close the cover by screwing in the two screws and replace the plastic panels to complete the job. As you can see, this is a very simple operation.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Air Filter of the Fiat Panda
Replacing the Cabin Air Filter of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Follow these instructions to remove and replace the cabin air filter of the Fiat Panda. First, get into the vehicle on the passenger side and remove …
How to Change the Cabin Filter on a Fiat Panda 169
How to Change the Cabin Filter on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) Replacing the cabin air filter on a Fiat Panda 169 is very straightforward as the filter is located behind the centre tunnel console and can be easil…
How to Replace the Cabin Filter on a Fiat Panda
How to Replace the Cabin Filter on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Replacing the cabin air filter on a Fiat Panda Multijet is a very simple task that can be done independently in just a few steps. Today, with the hel…

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos