Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Fiat Punto?

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Car stereo

To remove the radio, first sit in the driver's seat of your Fiat Punto. Start by inserting the extraction keys into the appropriate holes on the front of the radio. Once the keys are fully inserted, pull the radio towards you. After completing this step, disconnect the rear electrical connectors. This will successfully finish the removal, allowing you to install the new radio of your choice.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radio from a Fiat Punto Evo
How to Remove the Radio from a Fiat Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today, we will see in this video tutorial how to remove and replace the standard radio of the Fiat Punto Evo, as well as the Grande Punto, installing…
How to Replace the Radio in a Fiat Punto
How to Replace the Radio in a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this video tutorial, you will see how to remove and replace the factory radio in a Fiat Punto, following the instructions provided below. First, g…
How to Remove an Original Car Radio from a Fiat Grande Punto
How to Remove an Original Car Radio from a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to remove an original car radio from a Fiat Grande Punto? Carefully follow these steps to dismantle the radio. Use the original or aftermarket me…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos