Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of the rear light Fiat Freemont - Dodge Journey

Model: Fiat Freemont MK 1 - Years 2011-2016
Part: Tail light

In this video tutorial we will see how to remove the rear light on a Fiat Freemont and on a Dodge Journey, following these simple instructions. First we go to open the tailgate of the trunk and we go to unscrew the two fixing screws of the light that we find on the back, using a socket wrench; after which we extract the light from the outside, as shown in the video. At this point we disconnect the electrical connector of the bulbs and, if necessary, replace them with new ones; to reassemble the light it will be sufficient to apply the reverse disassembly procedure!

Posted on 24 December 2020 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the front seat on the Dodge Journey - Fiat Freemont
Disassembly of the front seat on the Dodge Journey - Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) .. for the disassembly of the front seat on the Dodge Journey, but also on the Fiat Freemont. First we open the front door and start by removing the.. …
Removal of air conditioning controls Dodge Journey - Fiat Freemont
Removal of air conditioning controls Dodge Journey - Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) .. how to remove the air conditioning controls on a Dodge Journey and a Fiat Freemont, as the same car models. First of all we get on board the car and.. …
Disassembly of the intake manifold of the Fiat Freemont - Dodge Journey
Disassembly of the intake manifold of the Fiat Freemont - Dodge Journey
Fiat Freemont (2011-2016 / MK 1) .. the intake manifold of the Fiat Freemont and Dodge Journey. First of all we open the bonnet and start by removing the intake sleeve connected to.. …

How to Remove the Front Shock Absorber on a Peugeot 406

How to remove the front shock absorber on a Peugeot 406? The first step is to lift the bonnet and secure it with the prop rod. Use a socket wrench to unscrew the shock absorber mounting bolts (engine bay), lift the car on a column lift and remove the front wheel. Unscrew the shock absorber mounting bolts at the wheel hub (detach the brake line clips with a screwdriver). Unscrew the bolts on the side, then remove the shock absorber from its housing (place a support under the bar). Compare the old part with the new one and prepare for installation. Fit the new shock absorber to the car, working in reverse order.

Watch the video!


by ScegliAuto

More videos