Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Intake Manifold of the Fiat Freemont - Dodge Journey

Model: Fiat Freemont MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016

Video tutorial

In today's tutorial video, we will see the main instructions for removing and replacing the intake manifold of the Fiat Freemont and Dodge Journey. First, open the bonnet and start by removing the intake hose connected to the throttle body; to do this, unscrew the clamp screw.

Next, remove the entire throttle body by disconnecting the electrical connector and unscrewing its screws; unscrew the screws of the intake manifold to remove it, replacing it with the new one by following the reverse procedure of disassembly!


Updated on 12 May 2026 by ScegliAuto


Related tutorials

Removing the Rear Light on Fiat Freemont - Dodge Journey
Removing the Rear Light on Fiat Freemont - Dodge Journey
Fiat Freemont (2011-2016 / MK 1) .. to remove the rear light on a Fiat Freemont and a Dodge Journey by following these simple instructions. First, open the boot and unscrew the two fixing.. …
How to Replace the Windscreen Washer Pump on the Fiat Freemont - Dodge Journey
How to Replace the Windscreen Washer Pump on the Fiat Freemont - Dodge Journey
Fiat Freemont (2011-2016 / MK 1) .. windscreen washer pump on the Fiat Freemont and Dodge Journey. First, open the bonnet and disconnect the intake hose by unscrewing the clamp screw;.. …
Removing the Climate Control Controls on a Dodge Journey - Fiat Freemont
Removing the Climate Control Controls on a Dodge Journey - Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) .. how to remove the climate control controls on a Dodge Journey and a Fiat Freemont, as they are the same car models. First, get into the vehicle and.. …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos