Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Ducato
    4. : Fiat Ducato 2015 headlight bulb replacement

Fiat Ducato - Video tutorial

Model: Fiat Ducato X290 - Years 2014-2023
Part: Headlight bulb
Operation: Fiat Ducato 2015 headlight bulb replacement

In this video tutorial we will see the instructions to be able to remove and replace the headlight bulb on a Fiat Ducato from 2014 to 2022. First we open the engine hood of the car and we go to disassemble the front light, unscrewing all the fixing screws of the headlight; after which we gently extract it outwards and disconnect the electrical connectors of the bulbs, as shown in the video. At this point we remove the plastic caps of the bulbs to access them; then we disconnect the connectors and unclip the metal clips to remove and replace the bulbs!


Posted on 5 January 2024 by ScegliAuto



How do you replace the headlight bulb on a Fiat Ducato?
Fiat Ducato (2006-2014 / X250) The headlight bulb on the Fiat Ducato is replaced by opening the bonnet of the vehicle, so that you can access the components inside the engine compa
Fiat Ducato headlight bulb replacement
Fiat Ducato (2014-2023 / X290) How to replace the headlight bulb on a Ducato? We lift the front hood and find the back of the headlight. We can remove the headlight if we have spac
Replacement of the front headlight bulbs of the Fiat Ducato.
Fiat Ducato (2014-2023 / X290) If a headlight bulb in the Fiat Ducato burns out, we must replace it as soon as possible for our safety and to avoid penalties. To do this, we open t

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos