Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the turn signal bulb of the Fiat Ducato mirror

Model: Fiat Ducato X290 - Years 2014-2026
Part: Light bulb

In this guide we will see the instructions that will allow us to disassemble and replace the bulb of the external rearview mirror of the Fiat Ducato. First of all, let's move to the side of the vehicle and start unscrewing the screw that we find on the inside of the mirror, thus removing the turn signal from the outside; then disconnect its electrical connector. At this point, we replace the turn signal bulb with the new one, also replacing the dome light if necessary, fixing it correctly on the external rearview mirror; all that remains is to verify its operation.

Posted on 16 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Indicator Bulb in the Wing Mirror of the Fiat Ducato
How to Replace the Indicator Bulb in the Wing Mirror of the Fiat Ducato
Fiat Ducato (2014-2026 / X290) In this guide, you will find instructions to remove and replace the indicator bulb in the external wing mirror of the Fiat Ducato. First, move to the…
How to replace the turn signal light bulb located on the mirror of the Fiat Ducato
How to replace the turn signal light bulb located on the mirror of the Fiat Ducato
Fiat Ducato (2006-2014 / X250) On Fiat Ducato, Citroen Jumper, or Peugeot Boxer vehicles, replacing the turn signal bulb located on the side mirror is a very simple operation to pe…
Replacing the Indicator Bulb on the External Rear-View Mirror of the Fiat Ducato
Replacing the Indicator Bulb on the External Rear-View Mirror of the Fiat Ducato
Fiat Ducato (2014-2026 / X290) This guide will show you the steps to remove and replace the indicator bulb on the external rear-view mirror of the Fiat Ducato, Camper version. Firs…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos