Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the turn signal light bulb located on the mirror of the Fiat Ducato

Model: Fiat Ducato X250 - Years 2006-2014
Part: Side marker bulb

On Fiat Ducato, Citroen Jumper, or Peugeot Boxer vehicles, replacing the turn signal bulb located on the side mirror is a very simple operation to perform independently. To carry out this operation, we need to slightly move the internal mirror and insert a screwdriver through the holes to remove the side turn signal. Disconnect the bulb connector and proceed with the replacement. Once the bulb has been replaced, reconnect the connector and insert the turn signal back into the mirror and adjust the internal mirror. All that's left is to test its functionality.

Posted on 6 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Indicator Bulb in the Wing Mirror of the Fiat Ducato
How to Replace the Indicator Bulb in the Wing Mirror of the Fiat Ducato
Fiat Ducato (2014-2026 / X290) In this guide, you will find instructions to remove and replace the indicator bulb in the external wing mirror of the Fiat Ducato. First, move to the…
How to Replace the Indicator Bulb in the Mirror on a Fiat Ducato?
Fiat Ducato (2014-2026 / X290) Replacing the indicator bulb in the mirror on the Fiat Ducato x290 van is a very simple and quick operation, as shown in the attached video tutorial.…
Removing the Exterior Mirror on Fiat Ducato
Removing the Exterior Mirror on Fiat Ducato
Fiat Ducato (2002-2006 / ) Is the mirror on your Fiat Ducato damaged? Here’s how to remove it from the vehicle. Pry between the edge of the mirror frame and the mirror glass. C…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos