Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Seat Headrest of a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011

Before you can start, sit in the left rear seat of your Fiat Punto second series. Begin by rotating the two hooks at the base of the headrest anti-clockwise, using a pair of pliers. Once you have rotated the two lower hooks, you will have successfully freed the headrest. At this point, simply pull the headrest out of the seat. By doing this, you will have completed the removal, and you will be free to fit a new headrest for the Fiat Punto or have the removed headrest repaired.

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headrest from a Fiat Punto
How to Remove the Front Headrest from a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Learn how to remove the front headrest from a Fiat Punto. This video explains the procedure. First, open the door and enter the back of the car (rear…
How to remove the headrest from the Fiat Punto Evo?
How to remove the headrest from the Fiat Punto Evo?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To remove the headrest from the Fiat Punto, first tilt the seat backwards to create more space for extracting the headrest. Once the backrest is tilt…
How to Install Seat Covers on a Fiat Punto
How to Install Seat Covers on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) To install seat covers on a Fiat Punto, a very simple operation: move the seat forward and raise the seat base, then remove the headrest from the bac…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the inertia switch on the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos