Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How do you remove the headrest of the Fiat Punto Evo?

Fiat Punto - Video tutorial

Model: Fiat Punto 199, Punto EVO, Grandepunto , MK 3 - Years 2005-2018
Part: Seat
Operation: How do you remove the headrest of the Fiat Punto Evo?

To be able to remove the Fiat Punto headrest, first of all you need to tilt the seat backwards, so that you can have more space to extract the headrest. Once the backrest has therefore been tilted, it will be necessary to press the two buttons located at the base of the headrest: by keeping them pressed, it will be possible to slide the brackets on which the headrest is located upwards. By continuing to pull the headrest upwards, it will be possible to extract its brackets from their housings in the upper part of the seat: in this way the new spare part can be inserted.


Posted on 13 October 2022 by ScegliAuto

    Frequently Asked Questions

    • Punto 2005-2018 - Why doesn't the seat of the Fiat Punto slide? Read Answer
    • Punto 1999-2011 - What to do if the seat belt gets stuck in the Fiat Punto? Read Answer
    • Punto 1999-2011 - How to adjust the driver's seat on Fiat Punto street? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos