Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Antenna on the Fiat Punto Evo

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Antenna

See other generations:
Video tutorial

In this video, learn how to remove and replace the antenna on the Fiat Punto Evo, as well as the Grande Punto, in simple and quick steps. First, move to the rear and unscrew the antenna counterclockwise to remove it from its base, as shown in the video; then replace it with the correct new one, screwing it in securely and checking the radio's functionality.

If you want to replace the entire antenna along with the base, you will need to remove the upper roof lining to unscrew the nut and disconnect the electrical connector.


Updated on 14 June 2026 by ScegliAuto


Related tutorials

How to Dismantle the Antenna of the Fiat Grande Punto
How to Dismantle the Antenna of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's video tutorial, you will see instructions on how to dismantle the antenna and replace its base on the Fiat Grande Punto, as well as the Pu…
How to Replace the Antenna Base Seal on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the antenna base seal on the Fiat Punto Evo, open the rear bonnet and remove the seal located in the tailgate, then remove the upper seal …
Removing the Original Stereo from a Fiat Punto Evo
Removing the Original Stereo from a Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) How to remove the original stereo from a Fiat Punto Evo? Carefully follow this guide: use the original or aftermarket metal keys to remove the stereo…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos