Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Antenna of the Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Antenna

See other generations:
Video tutorial

In today's video tutorial, you will see instructions on how to dismantle the antenna and replace its base on the Fiat Grande Punto, as well as the Punto Evo. First, open the boot's rear hatch and start by removing the upper seal; pry off the roof lining to access the antenna's mounting base, as shown in the video.

At this point, unscrew the nut and disconnect the electrical connector to completely remove the antenna; replace the base with the new one and reassemble everything, following the video tutorial to the end!


Updated on 14 June 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Antenna on the Fiat Punto Evo
How to Remove and Replace the Antenna on the Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, learn how to remove and replace the antenna on the Fiat Punto Evo, as well as the Grande Punto, in simple and quick steps. First, move…
How to Replace the Antenna Base Seal on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the antenna base seal on the Fiat Punto Evo, open the rear bonnet and remove the seal located in the tailgate, then remove the upper seal …
Replacing the Antenna Base on Grande Punto
Replacing the Antenna Base on Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Removing the damaged antenna from a Fiat Grande Punto? Here’s how to detach the antenna support from the roof of the car. Use a screwdriver to pry be…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos