Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Antenna Base Seal on the Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Antenna

See other generations:
This video is currently unavailable

To replace the antenna base seal on the Fiat Punto Evo, open the rear bonnet and remove the seal located in the tailgate, then remove the upper seal panel to access the roof. Next, remove the plastic clips using a 32 mm spanner to unscrew the nut that secures the antenna inside the cabin.

Once the nut is removed, disconnect the wiring held in place by a clip and pull out the antenna. Then remove the two Torx screws to take off the antenna base seal.

Insert the new seal and refit the antenna.


Updated on 6 September 2026 by ScegliAuto


Related tutorials

Replacing the Antenna Base on Grande Punto
Replacing the Antenna Base on Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Removing the damaged antenna from a Fiat Grande Punto? Here’s how to detach the antenna support from the roof of the car. Use a screwdriver to pry be…
How to Remove the A-Pillar Cover on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Removing the A-pillar cover on a Fiat Grande Punto is a simple and quick task to perform independently. Before removing the A-pillar cover, remove th…
How to Replace the Air Filter in a Fiat Grande Punto?
How to Replace the Air Filter in a Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this tutorial, see how to replace the air filter in a Fiat Grande Punto, an extremely simple and quick operation. First, ensure that the engine is…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos