Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Antenna Base on Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Antenna

See other generations:
Video tutorial

Removing the damaged antenna from a Fiat Grande Punto? Here’s how to detach the antenna support from the roof of the car. Use a screwdriver to pry between the roof panel and the metal to create space for unscrewing the screws. Unscrew the fastening pin of the antenna support (located between the metal and the support).

After removing the old support, you can fit the new one (screw the pin in with the screwdriver until it is fully secured). Turn on the radio and check its operation.

Reposition the roof cover panel and the plastic clips.


Updated on 20 March 2026 by ScegliAuto


Related tutorials

How to Replace the Antenna Base Seal on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the antenna base seal on the Fiat Punto Evo, open the rear bonnet and remove the seal located in the tailgate, then remove the upper seal …
How to Dismantle the Antenna of the Fiat Grande Punto
How to Dismantle the Antenna of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's video tutorial, you will see instructions on how to dismantle the antenna and replace its base on the Fiat Grande Punto, as well as the Pu…
Replacing the Rear Lights on Fiat Grande Punto - Punto Evo
Replacing the Rear Lights on Fiat Grande Punto - Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's video, you will learn how to remove and replace the rear lights on a Fiat Grande Punto and Punto Evo by following these simple steps. Firs…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos