Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Antenna on a Fiat Punto?

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Antenna

In this tutorial, you will see how to replace the antenna on a Fiat Punto, a very simple and quick operation. First, go inside the cabin and locate the front interior light. Use a flat-head screwdriver to pry it away from the roof along the perimeter. Next, disconnect the power connector, locate the antenna mounting bolt, and remove it using a socket spanner. At this point, you can remove the antenna itself, position the replacement, and follow the reverse procedure to reassemble everything.

Updated on 18 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Antenna Base Seal on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the antenna base seal on the Fiat Punto Evo, open the rear bonnet and remove the seal located in the tailgate, then remove the upper seal …
How to Remove and Replace the Antenna on the Fiat Punto Evo
How to Remove and Replace the Antenna on the Fiat Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, learn how to remove and replace the antenna on the Fiat Punto Evo, as well as the Grande Punto, in simple and quick steps. First, move…
How to Dismantle the Antenna of the Fiat Grande Punto
How to Dismantle the Antenna of the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video tutorial, you will see instructions on how to dismantle the antenna and replace its base on the Fiat Grande Punto, as well as the Pu…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos