Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How to replace the antenna and the support on the roof of the Fiat Punto

Fiat Punto - Video tutorial

Model: Fiat Punto 188, MK 2 - Years 1999-2011
Part: Antenna
Operation: How to replace the antenna and the support on the roof of the Fiat Punto

Let's see in this video how to replace the antenna and the support on the roof of the Fiat Punto. With a screwdriver we pry between the ceiling light and the sky panel (without breaking the sky), take the ceiling light out of the panel and disconnect the power supply terminal. Using a special socket wrench, unscrew the locking pin of the antenna support (located between the sheet metal and the support). We mount the new support on the car roof: we screw the nut with the socket wrench until it is completely locked. We check the correct assembly of the antenna and all its parts.


Posted on 25 October 2023 by ScegliAuto



How to remove the antenna on Fiat Punto
Fiat Punto (1999-2011 / 188, MK 2) Replacing the antenna with the support on a Fiat Punto? Let's see how it disassembles from above the car roof. With a screwdriver we pry between the
Replacing the antenna base on the Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Removing the damaged antenna on a Fiat Grande Punto? Let's see how the antenna mount above the car roof is removed. With a screwdriver we go to pry b
How to remove the antenna on Fiat Punto
Fiat Punto (1999-2011 / 188, MK 2) We replace the radio antenna in the passenger compartment if it is damaged. Let's see in this video how to replace and disassemble it: with a screwdr

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos