Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Antenna on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Antenna

Replace the damaged radio antenna in the cabin. Watch this video on how to replace and remove it: use a screwdriver to pry between the interior light and the headlining panel (without breaking the headlining), pull the interior light out of the panel and disconnect the power connector. Unscrew the securing bolt of the antenna mount (located between the metal and the mount). Install the new mount on the roof of the car (screw the bolt with the screwdriver until fully tightened). Test the correct operation of the antenna by turning on the radio.

Updated on 1 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Antenna Base Seal on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the antenna base seal on the Fiat Punto Evo, open the rear bonnet and remove the seal located in the tailgate, then remove the upper seal …
How to Dismantle the Antenna of the Fiat Grande Punto
How to Dismantle the Antenna of the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video tutorial, you will see instructions on how to dismantle the antenna and replace its base on the Fiat Grande Punto, as well as the Pu…
How to Remove and Replace the Antenna on the Fiat Punto Evo
How to Remove and Replace the Antenna on the Fiat Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, learn how to remove and replace the antenna on the Fiat Punto Evo, as well as the Grande Punto, in simple and quick steps. First, move…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos