Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bulb of a Fiat Freemont

Model: Fiat Freemont MK 1 - Years 2011-2016
Part: Headlight bulb

Before you can start, open the bonnet of your Fiat Freemont. Begin by uncliping it from its support and then lift the switch located above the bulb. Once done, move the bulb's voltage regulator towards the centre. This will give you access to the back of the bulb. Proceed by turning it anti-clockwise by about 20 degrees, then pull it out of the headlamp, and finally disconnect the relevant connector, and the disassembly will be complete. To fit the new bulb, repeat these steps in reverse, and you will have completed the replacement.

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fog Light Bulb on a Fiat Freemont / Dodge Journey
How to Replace the Fog Light Bulb on a Fiat Freemont / Dodge Journey
Fiat Freemont (2011-2016 / MK 1) Before you can start, turn the wheels of your Fiat Freemont fully to the right. Begin by removing the inner wheel arch liner. This will give you acce…
How to Replace the Fog Light Bulb on a Fiat Freemont
How to Replace the Fog Light Bulb on a Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) Before starting, turn the wheels of your Fiat Freemont to the right. Begin by removing the inner wheel arch liner using a flathead screwdriver for le…
Removing the Glove Compartment Light on a Fiat Freemont
Removing the Glove Compartment Light on a Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) This simple video tutorial shows how to remove and replace the dashboard bulb on a Fiat Freemont. First, open the glove compartment and let it drop b…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos