Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Light Bulb on a Fiat Freemont

Model: Fiat Freemont MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Fog lights

Video tutorial

Before starting, turn the wheels of your Fiat Freemont to the right. Begin by removing the inner wheel arch liner using a flathead screwdriver for leverage, which will give you access to the back of the fog light bulb.

At this point, disconnect the corresponding electrical connector, then remove the blown bulb. Once you have completed this step, you will have finished disassembling the fog light bulb on your Fiat Freemont.

To fit the new bulb and reassemble the wheel arch liner, simply follow this procedure in reverse, and you will have successfully completed the replacement.


Updated on 7 April 2026 by ScegliAuto


Related tutorials

How to Replace the Fog Light Bulb on a Fiat Freemont / Dodge Journey
How to Replace the Fog Light Bulb on a Fiat Freemont / Dodge Journey
Fiat Freemont (2011-2016 / MK 1) Before you can start, turn the wheels of your Fiat Freemont fully to the right. Begin by removing the inner wheel arch liner. This will give you acce…
Removing the Glove Compartment Light on a Fiat Freemont
Removing the Glove Compartment Light on a Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) This simple video tutorial shows how to remove and replace the dashboard bulb on a Fiat Freemont. First, open the glove compartment and let it drop b…
How to Replace the Front Bulb of a Fiat Freemont
How to Replace the Front Bulb of a Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) Before you can start, open the bonnet of your Fiat Freemont. Begin by uncliping it from its support and then lift the switch located above the bulb. …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos