Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Glove Compartment Light on a Fiat Freemont

Model: Fiat Freemont MK 1 - Years 2011-2016
Part: Instrument panel light

This simple video tutorial shows how to remove and replace the dashboard bulb on a Fiat Freemont. First, open the glove compartment and let it drop by pressing the two side clips. To completely remove it, slide out the bayonet fitting. To reach the bulb, you will need to remove the trim by unclipping it with your hands: this will give you access to the bulb holder and the bulb itself. Remember to disconnect the two-pin connector from the bulb. To remove the bulb, simply grasp it from underneath and pull it out. Proceed with installing the new bulb.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Glove Compartment Bulb on a Fiat Freemont
How to Replace the Glove Compartment Bulb on a Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) Before you can start, sit in the front passenger seat. Begin by opening and unfastening the glove compartment door. Next, unclip the rear support cor…
How to Replace the Fog Light Bulb on a Fiat Freemont / Dodge Journey
How to Replace the Fog Light Bulb on a Fiat Freemont / Dodge Journey
Fiat Freemont (2011-2016 / MK 1) Before you can start, turn the wheels of your Fiat Freemont fully to the right. Begin by removing the inner wheel arch liner. This will give you acce…
How to Replace the Fog Light Bulb on a Fiat Freemont
How to Replace the Fog Light Bulb on a Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) Before starting, turn the wheels of your Fiat Freemont to the right. Begin by removing the inner wheel arch liner using a flathead screwdriver for le…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos