Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel from a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Door trim panel

See other generations:
Video tutorial

Using a plastic wedge and prying behind it, remove the triangular plastic piece located on the door pillar, next to the window (unscrew the silver ring). Similarly, remove the cover plastic next to the opening handle and unscrew the now exposed screw.

Unscrew the screw located under the central handle and the two positioned under the door panel. At this point, begin to pry around the entire area surrounding the panel, gently pulling it out of its seat bit by bit until it is almost fully removed: to take it out completely, you will finally need to disconnect the lock wire.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

How do you remove the inner door panel in the Fiat Panda 169?
How do you remove the inner door panel in the Fiat Panda 169?
Fiat Panda (2003-2012 / 169, MK 2) Disassembling the interior panel of the door of the Fiat Panda 169, as with any other car, could be a consequence related to an attempted theft, as i…
How to Remove the Door Panel of a Fiat Panda
How to Remove the Door Panel of a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Start by opening the door of your Fiat Panda. Next, unclip and remove the covers located near the internal door handle. Once done, unscrew and remove…
Replacing the Door Lock on a Fiat Panda 169
Replacing the Door Lock on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) Discover the procedure to remove and replace the door lock cylinder on the front door of a Fiat Panda 169, second series. First, open the front door …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos