Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Pressure Sensor Replacement on Fiat Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Control unit

See other generations:
Video tutorial

Lift the bonnet and insert the support rod. First, remove the air box by unscrewing the three screws and removing the clip. The "absolute pressure" sensor is located next to the oil dipstick and is secured by a T30 Torx screw.

Before unscrewing it, disconnect the connector from the tab. It's that simple! Sensor removed. If you want to clean it, spray it with a suitable cleaner but avoid touching the sensor area with your fingers; otherwise, replace it. The atmospheric pressure sensor has the same connector and is also secured by a T30.


Updated on 5 April 2026 by ScegliAuto


Related tutorials

How to Replace the EGR Valve on a Fiat Punto Evo
How to Replace the EGR Valve on a Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the EGR valve on a Fiat Punto, open the bonnet to access the components within the engine bay. The valve is located between the intake man…
How to Set the Time on a Fiat Grande Punto
How to Set the Time on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before you start, sit in the driver's seat of your Fiat Grande Punto. Begin by activating the instrumentation by turning the key in the ignition swit…
How to Remove the Front Seat of a Fiat Punto
How to Remove the Front Seat of a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before you start, open the front door of your Fiat Punto. Begin by unscrewing and removing the Torx screws that secure the seat rails to the car. Nex…

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the Blue & Me control unit located on Fiat Grande Punto Evo? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos