Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seats of a Fiat Panda

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Seat

See other generations:
Video tutorial

Before you can start, open the rear doors of your Fiat Panda. Begin by unscrewing and removing all the screws that secure the lower bench of the rear seats, then remove the bench itself.

After that, unclip and remove the parcel shelf. Next, unscrew the screws and bolts that secure the seatbelts and the hinges of the rear seat backs.

At this point, you can also remove the seat backs. Once you have completed this step, you will have successfully finished the disassembly.


Updated on 7 April 2026 by ScegliAuto


Related tutorials

How to Fold the Rear Seats on a Fiat Punto
How to Fold the Rear Seats on a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To fold the rear seats of a Fiat Punto, follow these general steps. Open the boot: this will give you access to the levers or buttons that control th…
How to Remove the Rear Seat Backs from a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before you start, lower the two rear seat backs of your Fiat Punto. Begin by removing the carpet in the boot. Next, remove the lower bench of the rea…
Removing the Rear Seats from a Fiat Punto
Removing the Rear Seats from a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this brief and simple guide, we will see the instructions that will allow us to remove and replace the rear seats of the Fiat Punto. First, open t…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos