Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Sun Visor on Fiat Punto 188 MK2

Model: Fiat Punto MK 2, 188 - Years 1999-2011

In this video, you will learn how to remove and repair the sun visor on a Fiat Punto 188, second series, by following these simple steps. First, get inside the vehicle and remove the sun visor; to do this, unscrew the fastening screws found on the two brackets using a T20 Torx spanner. Once removed, extract the two clips inside the broken sun visor; then install new clips and reattach the material of the sun visor. Finally, refit it and check its functionality!

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Sun Visor from a Fiat Punto
How to Remove the Sun Visor from a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Follow these main instructions to remove and replace the sun visor of the Fiat Punto by following these simple steps. First, get into the vehicle and…
Removing the Sun Visor from a Fiat Punto MK2
Removing the Sun Visor from a Fiat Punto MK2
Fiat Punto (1999-2011 / MK 2, 188) In this video, see how to remove the sun visor from a Fiat Punto MK2 in simple steps using only a Torx spanner. To do this, get inside the car and lo…
How to Remove the Door Panel to Access the Lock on Fiat Punto
How to Remove the Door Panel to Access the Lock on Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) To remove the door panel to access the lock on a Fiat Punto, disconnect the battery terminals located in the engine bay. Using a screwdriver, unscrew…

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the inertia switch on the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos