Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Sun Visor from a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011

Follow these main instructions to remove and replace the sun visor of the Fiat Punto by following these simple steps. First, get into the vehicle and start by unfastening the sun visor on the right side; then unscrew the mounting screws to completely remove the sun visor, as shown in the video. At this point, remove the other sun visor in the same way; then install the new sun visors by applying the reverse procedure, securing them correctly with the original screws!

Updated on 29 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Sun Visor from a Fiat Punto MK2
Removing the Sun Visor from a Fiat Punto MK2
Fiat Punto (1999-2011 / MK 2, 188) .. In this video, see how to remove the sun visor from a Fiat Punto MK2 in simple steps using only a Torx spanner. To do this,.. …
How to Repair the Sun Visor on Fiat Punto 188 MK2
How to Repair the Sun Visor on Fiat Punto 188 MK2
Fiat Punto (1999-2011 / MK 2, 188) In this video, you will learn how to remove and repair the sun visor on a Fiat Punto 188, second series, by following these simple steps. First, get …
How to Remove the Front Bumper of a Fiat Grande Punto
How to Remove the Front Bumper of a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to remove the front bumper of a Fiat Grande Punto? Let's look at the removal process. Lift the bonnet and secure it. Using a metal lever, remove …

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the inertia switch on the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos