Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wheel Bearing on a Fiat Punto 2

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Bearing

In today's video, we will see how to disassemble and replace the rear wheel bearing on a second series Fiat Punto, following these simple steps. First, lift the vehicle and remove the rear wheel; then unscrew the two screws of the drum to remove it, as shown in the video. At this point, remove the hub nut cover to unscrew the nut using a 32 mm socket; remove the spacer and replace the wheel bearing, inserting the washer. Follow the video to the end for reassembly!

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Wheel Bearing on the Fiat Punto
Replacing the Rear Wheel Bearing on the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Let's see in this guide the steps to remove and replace the rear wheel bearing on the Fiat Punto, following these simple steps. First, lift the vehic…
Guide to Replacing the Front Wheel Bearing of the Fiat Grande Punto
Guide to Replacing the Front Wheel Bearing of the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Here are the instructions to help you remove and replace the front wheel bearing of the Fiat Grande Punto, as well as the Punto Evo. First, lift the …
How to Remove the Wheel Bearing on Fiat Punto
How to Remove the Wheel Bearing on Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Remove the wheel bearing and all associated parts on a Fiat Punto. Position your car on a column lift; loosen the bolts with a socket spanner and rai…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos