Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Front Wheel Bearing of the Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Bearing

Here are the instructions to help you remove and replace the front wheel bearing of the Fiat Grande Punto, as well as the Punto Evo. First, lift the vehicle and start by removing the front wheel by unscrewing the bolts; then, unscrew the screws of the front brake caliper, removing it from the disc, as shown in the video. At this point, unscrew the central nut of the bearing to remove it from the front driveshaft, replacing it with the new original one; properly secure and grease the new bearing, following the video tutorial to the end!

Updated on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Wheel Bearing on the Fiat Punto
Replacing the Rear Wheel Bearing on the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Let's see in this guide the steps to remove and replace the rear wheel bearing on the Fiat Punto, following these simple steps. First, lift the vehic…
How do you replace the timing belt of the Fiat Grande Punto?
How do you replace the timing belt of the Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In order to replace the timing belt of the Fiat Grande Punto, you need to loosen the screws that secure the front right wheel of the vehicle. Once th…
Replacing the Front Brake Pads of the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This guide reveals the main instructions for removing and replacing the front brake pads of the Fiat Grande Punto. First, lift the vehicle and remove…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos