Do it yourself
| ||||
|
Fiat Punto - Video tutorial
Model: Fiat Punto
188, MK 2
- Years 1999-2011 Let's see in this guide the steps that will allow us to disassemble and replace the rear wheel bearing of the Fiat Punto, following these simple steps. First we lift the car and remove the rear wheel; then we go to remove the brake drum, removing the cotter pin and unscrewing the screws, as shown in the video. At this point we unscrew the central nut of our bearing, in order to remove it; let's clean up the braking system and install the new wheel bearing, making it come to the stop, following the video to the end!
Posted on 21 April 2024 by ScegliAuto
Other guides that may interest you
|
How to open the Piaggio Beverly saddle with a flat batteryIn today's video we see how to open the Piaggio Beverly saddle in case the service battery has run out. First we proceed by opening the compartment on the shield, using the appropriate key. Inside we will find a lever that we will have to pull; at the same time we proceed to unhook the saddle, lifting it. These two operations together, with a little elbow grease, will allow you to open the saddle in cases of extreme need. In fact, we recommend carrying out this operation only if strictly necessary, otherwise it could compromise the correct functioning of the mechanism in the long run. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.020
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |