Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Wiper Motor from a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Power window motor

See other generations:
Video tutorial

In this video guide, you will learn how to remove the wiper motor from a second-generation Fiat Punto. First, remove the wipers by pressing the buttons and sliding them off; then, open the bonnet and remove the upper plastic cover to access the motor.

At this point, remove the cover and use a socket wrench to unscrew the mounting bolts: now remove the entire wiper arm along with the motor, as shown in the video. Finally, replace the component and reassemble everything!


Updated on 12 April 2026 by ScegliAuto


Related tutorials

Removing the Wiper Motor from a Fiat Grande Punto
Removing the Wiper Motor from a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this tutorial, you will learn how to remove the wiper motor from a Fiat Grande Punto. First, remove the wipers by unscrewing the nuts to take them…
Replacing the Wiper Motor on Fiat Punto
Replacing the Wiper Motor on Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this guide, learn how to replace the wiper motor on a Fiat Punto. Pull the plastic lever located at the bottom left of the dashboard, lift the eng…
How to Remove the Rear Wiper Motor on Fiat Punto
Fiat Punto (1993-1999 / MK 1, 176) In this video tutorial, you will learn how to remove the rear wiper motor on a first-generation Fiat Punto by following the instructions below. First…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos