Do it yourself
Frequently asked questions about cars and motorcycles

Replacing T5 Bulbs for Climate Control Commands

Model: Fiat Multipla MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Instrument panel light

Video tutorial

To access the bulbs that illuminate the centre console, first remove the gear lever cover; then pull the central knob of the climate control commands and unscrew the Allen screw underneath to release the control console and access the bulbs. Extract the two bulbs from the bulb holder and replace them with new ones (it is suggested to replace both regardless: T5 fitting model).

Then turn on the ignition and lights to ensure the newly installed bulbs are functioning correctly and proceed in reverse for reassembly.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Fiat Multipla (1998-2010 / MK 1) In this video, we will see how to remove the climate control panel, thus replacing the bulbs, on a first series Fiat Multipla. First, get inside the …
Fiat Multipla (1998-2010 / MK 1) Before you begin, sit in the front passenger seat of your Fiat Multipla. Start by removing the central knob from the dashboard. This will reveal an A…
Fiat Multipla (1998-2010 / MK 1) Open the front bonnet by pulling the lever located at the bottom right of the dashboard and secure it with the prop. Locate the inspection caps for t…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos