Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dashboard Bulbs of a Fiat Multipla

Model: Fiat Multipla MK 1 - Years 1998-2010
Part: Interior dome light bulb

Before you begin, sit in the front passenger seat of your Fiat Multipla. Start by removing the central knob from the dashboard. This will reveal an Allen screw that you need to unscrew. Once done, gently lift the dashboard just enough to access the burnt-out bulbs underneath. After lifting the dashboard, you will reach the burnt-out bulbs. To remove them, simply pull them out of their housing, and you will have completed the disassembly. At this point, to install the new bulbs and close the dashboard, repeat these steps in reverse, and you will have completed the replacement.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulbs on a Fiat Multipla
How to Replace the Front Headlamp Bulbs on a Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) Open the front bonnet by pulling the lever located at the bottom right of the dashboard and secure it with the prop. Locate the inspection caps for t…
Removing the Climate Control Panel on a Fiat Multipla
Removing the Climate Control Panel on a Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) In this video, we will see how to remove the climate control panel, thus replacing the bulbs, on a first series Fiat Multipla. First, get inside the …
How to Remove the Battery from a Fiat Multipla
How to Remove the Battery from a Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) Before starting, open the bonnet of your Fiat Multipla by pulling the designated release handle located at the bottom left of the steering column. Be…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos