Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Multipla
    4. : Replacing the rear light bulb on the Fiat Multipla

Fiat Multipla - Video tutorial

Model: Fiat Multipla MK 1 - Years 1998-2010
Part: Rear light bulb
Operation: Replacing the rear light bulb on the Fiat Multipla

Let's find out today the procedure that will allow us to disassemble and replace the rear light bulb of the Fiat Multipla. First of all, we open the tailgate of the trunk and start unscrewing the plastic caps that we find on the side; then disconnect the electrical connector of the bulbs that we find inside and unscrew the headlight fixing screws, in order to remove it, as shown in the video. Once the headlight has been removed, let's hope the ceiling light from the lamp holder, removing and replacing the bulbs with new ones and reassembling everything!


Posted on 3 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Multipla 1998-2010 - What tools are needed to replace the brake light bulb on a Fiat Multipla? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos