Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlamp of a Fiat Multipla

Model: Fiat Multipla MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Headlight

Video tutorial

In this video, you will learn how to remove the upper front headlamp along with the bulbs on a Fiat Multipla. The car has a very simple and quick headlamp removal system.

Remove the plastic covering the hole (as shown in the video), then unscrew the screw inside using a screwdriver. After removing the screws, detach the headlamp and pull it out from the bumper; disconnect the power connectors and replace any damaged bulbs or replace the entire unit.

The reassembly phase is very straightforward: insert the headlamp into its housing (as shown in the video), screw in the securing screws. Finally, test the correct operation of the lights.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

How to Remove the Front Fog Light on a Fiat Multipla
How to Remove the Front Fog Light on a Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) Start by unscrewing and removing the screw that secures the fog light to the bumper of your Fiat Multipla. Next, unscrew and remove the two lower scr…
How to Remove the Fog Light on Fiat Multipla
How to Remove the Fog Light on Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) In this video, see how to replace the fog light along with the bulb on Fiat Multipla. Prepare to remove the side fog light located on the bumper: uns…
How to Remove the Battery from a Fiat Multipla
How to Remove the Battery from a Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) Before starting, open the bonnet of your Fiat Multipla by pulling the designated release handle located at the bottom left of the steering column. Be…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos