Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fog Light on Fiat Multipla

Model: Fiat Multipla MK 1 - Years 1998-2010
Part: Fog lights

In this video, see how to replace the fog light along with the bulb on Fiat Multipla. Prepare to remove the side fog light located on the bumper: unscrew the fastening screw of the light using a suitable screwdriver, then remove the light from the bumper. Once the light is extracted, take it out from the car's bumper. After removing the fog light, replace it with a new one, ensuring it has the same size and voltage as the old one. Refit the fog light into the car's bumper with the fastening screw. Test the lights for proper operation.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Fog Light on a Fiat Multipla
How to Remove the Front Fog Light on a Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) Start by unscrewing and removing the screw that secures the fog light to the bumper of your Fiat Multipla. Next, unscrew and remove the two lower scr…
How to Remove the Battery from a Fiat Multipla
How to Remove the Battery from a Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) Before starting, open the bonnet of your Fiat Multipla by pulling the designated release handle located at the bottom left of the steering column. Be…
Where is the OBD port of the Fiat Multipla located?
Where is the OBD port of the Fiat Multipla located?
Fiat Multipla (1998-2010 / MK 1) If you own a Fiat Multipla and want to locate the OBD port of the vehicle, all you have to do is carefully read the following guide and follow the st…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos