Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Multipla
    4. : How to replace headlight bulbs on Fiat Multipla

Fiat Multipla - Video tutorial

Model: Fiat Multipla MK 1 - Years 1998-2010
Part: Headlight bulb
Operation: How to replace headlight bulbs on Fiat Multipla

How to replace headlight bulbs on Fiat Multipla. We open the bonnet by pulling the lever located at the bottom right of the dashboard, let's put it in safety. We find the inspection cap of the lighthouse and (placed in the rear part of the lighthouse) remove it. We disassemble the bulbs with the metal hooks, take out the lamp holders from the headlight and go to extract the damaged bulb with the help of a screwdriver. We mount the new bulb and (always suitable type and size) we insert the lamp holder in the lighthouse housing. Finally we close the lighthouse with the inspection cap and test the correct functioning of the lights.


Posted on 20 October 2023 by ScegliAuto



How to replace the headlight bulbs on a Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) Let's see how to replace the headlight bulbs of a Fiat Multipla. We open the front hood by pulling the lever located at the bottom right of the dashb
How to remove the headlight of a Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) In this video we explain how to remove the upper headlight with attached bulbs on Fiat Multipla. The car has a very simple and quick headlight remova
Replacing the rear light bulb on the Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) Let's find out today the procedure that will allow us to disassemble and replace the rear light bulb of the Fiat Multipla. First of all, we open the

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos