Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Roof Bars on a Fiat Tipo

Model: Fiat Tipo 358, 356, 357 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Roof rack bars

See other generations:
Video tutorial

Before you begin, open all four doors of your Fiat Tipo. Start by assembling the roof bars, positioning and securing the side support brackets to the bars. Next, place the bars with the side brackets on the roof, fitting the brackets around the upper pillars of the roof.

Once this is done, tighten the brackets to the pillars by screwing in the fixing screws. After you have tightened all four brackets of the two roof bars, you will have successfully completed the installation.


Updated on 16 April 2026 by ScegliAuto


Related tutorials
(2016-2026 / 358, 356, 357) …
How to Replace the Rear Wiper Blade on a Fiat Tipo
How to Replace the Rear Wiper Blade on a Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) How to replace the rear wiper blade on a Fiat Tipo. Unscrew the nut located above the rear wiper blade. Grasp the rear blade with your hands and gent…
How to install dynamic side indicators on the Fiat Tipo
How to install dynamic side indicators on the Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) Let's see how to install a very easy and inexpensive accessory that will also enhance the appearance of your Fiat Tipo, giving it a more modern look:…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos