Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install dynamic side indicators on the Fiat Tipo

Model: Fiat Tipo 358, 356, 357 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Body

See other generations:
Video tutorial

Let's see how to install a very easy and inexpensive accessory that will also enhance the appearance of your Fiat Tipo, giving it a more modern look: dynamic side indicators. They can be purchased on any e-commerce platform.

Our YouTuber recommended these on Amazon, code B08S45921L, costing £25.99 for the pair, including delivery charges. The installation is really easy.

Use a plastic spatula to lever under the side 'gem' and remove it. Disconnect the electrical connector and apply the new one. Refit the new 'gem' by pressing it into place. Repeat the process on the other side, and the job is done.


Updated on 6 July 2026 by ScegliAuto


Related tutorials

How to Install Roof Bars on a Fiat Tipo
How to Install Roof Bars on a Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) Before you begin, open all four doors of your Fiat Tipo. Start by assembling the roof bars, positioning and securing the side support brackets to the…
How to Set the Time in a Fiat Tipo?
How to Set the Time in a Fiat Tipo?
Fiat Tipo (2016-2026 / 358, 356, 357) In this short tutorial, you will see how to set the clock in the Fiat Tipo, a very simple operation that you can perform, for example, after the swit…
Guide to Removing the Dashboard of the Fiat Tipo
Guide to Removing the Dashboard of the Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) Here are the main steps to remove and replace the dashboard, which is necessary for removing the heating radiator of the Fiat Tipo. First, get inside…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos