Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Climate Control Knobs on the Fiat Stilo

Model: Fiat Stilo MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: A/C controls

Video tutorial

In today's video, you will see the main instructions that will allow you to remove and replace the climate control knobs on the Fiat Stilo. First, get inside the vehicle and remove the radio; then take off the plastic trim of the central instrument panel by prying at the sides, and unscrew the upper screws to extract all the controls, as shown in the video.

To simply remove the knobs, just pull them towards you; then replace them and reassemble everything by following the reverse procedure of disassembly!


Updated on 16 April 2026 by ScegliAuto


Related tutorials

How to Remove the Climate Control Switches on a Fiat Stilo
How to Remove the Climate Control Switches on a Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) Before you begin, sit in the driver's seat of your Fiat Stilo. Start by removing the radio, unclipping the surrounding trim, unscrewing the securing …
Where is the OBD port of the Fiat Stilo located?
Where is the OBD port of the Fiat Stilo located?
Fiat Stilo (2001-2010 / MK 1) To find the OBD port of your Fiat Stilo, it only takes a few seconds. All you have to do is carefully read the following guide and then follow the va…
Where is the fuse box located in the Fiat Stilo?
Where is the fuse box located in the Fiat Stilo?
Fiat Stilo (2001-2010 / MK 1) If you don't yet know where the box containing all the various fuses of your Fiat Stilo is located, don't worry because in the following mini guide y…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos