|
Do it yourself
| |||
| ||||
How to Replace the Front Electric Window Regulator on the Fiat Punto
Model: Fiat Punto
MK 2, 188
- Years 1999-2011
This guide shows how to remove the electric window regulator from the front passenger seat of the Fiat Punto. The first step is to remove the inner door panel; to do this, unscrew all the fastening screws and the switch panel holder. Next, using plastic levers, apply pressure on the edge of the panel to detach it completely. Be careful with the lock cable and the audio connector, both must be disconnected. Now, detach the part of the soundproofing cover; keep this piece as it will be needed during reassembly. To remove the window regulator, raise the glass and unscrew the three fastening bolts and the electrical connector of the part; the mechanism can now be removed. This part is readily available from a scrap yard, online, or from an authorised dealer. Before reassembling the new part, grease the sliding components. Before inserting the part into the door, detach the red plastic part to align the hole on the glass with the window motor; reattach the red plastic part; tighten and secure the bolts of the regulator. At this point, reconnect the power to the motor. Reposition the soundproofing panel with double-sided tape, reattach the audio connector and the lock cable, and reassemble the door panel. Follow the steps in reverse to secure the panel. The replacement is complete.
Updated on 17 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Fiat Punto
(2005-2018 /
MK 3, Punto EVO, 199, Grandepunto )
Today's video tutorial will show us how to disassemble and repair (or replace) the window regulator motor of the Fiat Grande Punto, as well as the Pu…
Fiat Punto
(2005-2018 /
MK 3, Punto EVO, 199, Grandepunto )
Today we will discover the instructions that will allow us to deactivate the front passenger airbag of the Fiat Punto Evo, in simple and quick steps.…
Fiat Punto
(2005-2018 /
MK 3, Punto EVO, 199, Grandepunto )
In order to replace the window regulator of the Fiat Grande Punto, you need to loosen the screws that secure the door panel corresponding to its hous…
Other guides you may be interested in
|
How to Bleed the Clutch on a Renault Clio?
To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.495
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |