Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : Fiat Panda cigarette lighter bulb replacement

Fiat Panda - Video tutorial

Model: Fiat Panda MK 2, 169 - Years 2003-2012
Part: Cigarette Lighter
Operation: Fiat Panda cigarette lighter bulb replacement

In the case in question we have as an example a Fiat Panda 169, but be aware that changing the cigarette lighter bulb is a similar procedure in all cars. So whatever car you have, follow the tutorial. Turn on the ignition, open the cigarette lighter cap and if the bulb does not work, take a flathead screwdriver, levering the cigarette lighter frame to remove it. This will be enough for you to be able now to disconnect the connector and replace the bulb by simply unscrewing the old one and screwing the piece you have purchased. Plug in the connector and check operation.


Posted on 13 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Panda 2003-2012 - Why does the Fiat Panda cigarette lighter not work? Read Answer
    • Panda 2003-2012 - What is the cigarette lighter fuse on Fiat Panda 169? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos