Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the wiper motor and arm on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Power window motor

In this video, you will see how to remove and replace the arm and motor of the front wipers on a second-generation Fiat Panda. First, open and lift the bonnet and remove the wiper arms by unscrewing the fastening nuts at the base; then remove the plastic cover at the top by unscrewing the three fastening screws, giving you access to the window lift mechanism along with the motor. At this point, disconnect the electrical connector of the motor and remove the entire mechanism as shown in the video; then reassemble everything!

Updated on 18 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Front Wipers on the Fiat Panda
How to Replace the Front Wipers on the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Below are the instructions that will allow you to remove and replace the front wipers on the Fiat Panda. First, move to the front of the vehicle and …
Removing the Wiper Arms on the Fiat Panda 169
Removing the Wiper Arms on the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In this tutorial, learn how to remove the front wiper arms and the scuttle panel on the Fiat Panda 169, as well as the Punto, in simple steps. First,…
How to Replace Wiper Blades on a Fiat Panda 169
How to Replace Wiper Blades on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In today's video, you will replace the front and rear wiper blades on a second-generation Fiat Panda 169 in simple steps. First, start by removing an…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos