Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Tyre Pressure Warning Light on a Fiat Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tire pressure warning light

See other generations:
Video tutorial

In this video tutorial, learn how to reset the tyre pressure warning light on a third-generation Fiat Punto; before performing the reset operation, ensure that any issues related to the pressure variation of one or more tyres that caused the warning light to activate have been resolved.

Then, get inside the vehicle and turn on the ignition by turning the key; next, scroll using the arrows located at the bottom right on the driver's side, and once you reach the tyre pressure option, press the "set" button to reset it, as shown in the video!


Updated on 19 April 2026 by ScegliAuto


Related tutorials

Resetting the Tyre Pressure Light on Fiat Punto
Resetting the Tyre Pressure Light on Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will see how to reset the tyre pressure light on a Fiat Grande Punto and Punto Evo, in a few simple steps outlined below;…
How to Reset the Tyre Pressure Light on the Fiat Grande Punto?
How to Reset the Tyre Pressure Light on the Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) You can completely clear the tyre pressure light on the Fiat Grande Punto by inflating the tyres to the optimal pressure value, which is indicated on…
How to Reset the Tyre Pressure Light on a Fiat Punto Evo
How to Reset the Tyre Pressure Light on a Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, learn how to reset the tyre pressure light on a Fiat Punto Evo. Press the "Set" button located on the dashboard (right side), then, on…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos