Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Gearbox Revision on Fiat Panda 4x4

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Transmission

This tutorial for experienced mechanics begins with the gearbox already removed from the car. Using a 30 mm socket, unscrew the upper nuts: if they are too tight, use a flat screwdriver for assistance. Once the upper piece is removed and set aside, remove the fifth gear sleeve hub. At this point, you can take out the duct and the fifth gear roller cage, followed by the corresponding gear. Using a 13 mm socket, unscrew the 3 screws that secure the intermediate cover. Next, remove the support bush of the roller cage. As shown in the video, remove the other two 13 mm bolts that secure the gearbox externally.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Rear Differential Oil of the Fiat Panda 4x4 169
How to Change the Rear Differential Oil of the Fiat Panda 4x4 169
Fiat Panda (2003-2012 / 169, MK 2) In today's tutorial video, we will see how to change the rear differential oil on the Fiat Panda 4x4 169. Start by lifting the car and locating the p…
Guide on How to Remove the Propshaft and Gearbox
Fiat Panda (1980-2003 / 141, MK 1) The narrator explains the investigations carried out following the vibrations and jolts experienced during driving and confirms, after a thorough che…
How to Replace the Engine Oil and Oil Filter on the Fiat Panda 169 4x4
How to Replace the Engine Oil and Oil Filter on the Fiat Panda 169 4x4
Fiat Panda (2003-2012 / 169, MK 2) Let’s discover the procedure to perform routine maintenance by replacing the engine oil and oil filter on the Fiat Panda 169 4x4. First, lift the veh…

    Frequently Asked Questions

    • Panda 2003-2012 - What to do if the gearbox is noisy in the Fiat Panda? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos